I am here to help you find the best tools possible because I know the pain, writing these reviews does take time, however. ”We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Top 5 Best Corded Oscillating Tools

The oscillating tool perhaps one of the most versatile tools in your bag. The oscillating tool goes where other tools can’t. There are not many tools other than the oscillating tool that allow you to precisely cut the bottom of casing one minute and cut through a rusty bolt the next. Are they loud? Yes. Are they awesome? Absolutely.  

With all these tool manufacturers pouring billions of dollars into their cordless tool lines, one may think a cordless oscillating tool could outperform the corded ones. This, however, is not the case. There is certainly a time and a place for the cordless oscillating tool. If your environment allows and you want the best possible performance, a corded oscillating tool is the way to go. Corded oscillating tools are often faster, never run out of battery, and are more powerful. The only drawback is, of course, the cord. 

What is the best corded oscillating tool? In this review, we are going to look at the top 5 best corded oscillating tools. 

Top 5 Best Corded Oscillating Tools-Comparison Chart


Fein Starlock FMM 350QSL MultiMaster

Rockwell Sonicrafter F50 

Makita TM3010CX1 

Bosch GOP55-36B 5.5 Amp Corded StarlockMax

Multi-Max MM35

Oscillations per Minute







7 lbs


3.7 lbs

7.8 lbs

2.8 lbs


Keyless Quick Blade Change

Hyperlock Tool Free Clamping, Varible Speed

Keyless Chuck, Hard Case

Starlock Blade Change System

Quick Blade Change, Soft Carry Bag


1 Year

3 Year

1 Year

1-Year Warranty

2 Year


Best Corded Oscillating Tool– Fein Starlock FMM 350QSL MultiMaster 

5 Best Corded Oscillating Tools

Check Price

Oscillations per Minute: 10,000-19,500 

Weight: 7 lbs 

Features: Keyless Quick Blade Change 

Warranty: 1 Year 

What we like: 

The Fein Starlock FMM 350QSL MultiMaster is one of the top 5 best corded oscillating tools for good reason. The 350QSL has an extremely fast blade change system, which consists of flipping a lever to drop the blade and then setting the tool on the blade to re-attach. The 350QSL offers variable speed settings from 10,000 to 19,500 OPM. While the speed may not be the fastest on the list the Starlock FMM 350QSL MultiMaster is sure to outperform a cordless oscillating tool due to its higher amperage and superior build quality. 

20,000 OPM is only useful if you have the power to back it up. Think of it like this: you are using a hand saw to cut through a log, you are moving the saw very fast, but putting no force downward into the log; you get nowhere. If you have a super-fast oscillating tool, but it stops or slows down when it touches a material, what good is the speed? 

What we don’t like: 

The only downside to the Fein Starlock FMM 350QSL MultiMaster is the price. The 350QSL is not exactly a starter tool, but if you are willing to spend the money, it is definitely a great option. 

Top 5 Best Corded Oscillating Tools(Budget Pick)Rockwell Sonicrafter F50 

5 Best Corded Oscillating Tools

Check Price

Oscillations Per Minute: 20,000 

Weight: 5.3lbs 

Features: Hyperlock Tool Free Clamping, Variable Speed 

Warranty: 3 Year 

What we like:

ThRockwell Sonicrafter F50 sports a 4 amp motor which helps ensure that the 20,000 OPM can actually cut. The blade change system is very easy and is compatible with most blades. The Rockwell Sonicrafter F50 has great performance for the price, coming in at around half that of the Fein. 

What we don’t like:

The Rockwell Sonicrafter F50 seems to have some noticeable vibrations at high speeds.

Best Value Corded Oscillating Tool-Makita TM3010CX1 

5 Best Corded Oscillating Tools

Check Price

Oscillations per Minute: 6,000-20,000 

Weight: 3.7 lbs 

Features: Keyless Chuck, Hard Case 

Warranty: 1 Year 

What we like: 

The Makita TM3010CX1 is once again, another great tool from Makita. The TM3010CX1 is only 3.7 lbs, which is almost less than half the weight of the Fein Multi-master 350SQLThe TM3010CX1 comes with a hard carry case, to keep the tool protected. The TM3010CX1 blade change system is easy to use and accepts most aftermarket blades. 

What we don’t like:

The TM3010CX1 could use slight improvements to vibration control. Also, there have been complaints about the durability of the blades included in the kit.  

Most powerful Corded Oscillating tool- Bosch GOP55-36B 5.5 Amp Corded StarlockMax Variable Speed Oscillating Multi-Tool 

5 Best Corded Oscillating Tools

Check Price

Oscillations per Minute: 8,000-20,000 

Weight: 7.8 lb 

Features: Starlock Blade Change System 

Warranty: 1-Year Warranty 

What we like:

With 5.5 Amps the Bosch GOP55-36B is sure to power through whatever is thrown it’s way. The Bosch GOP55-36B is built well and Bosch engineered this tool with reduced vibration in mind. The Bosch GOP55-36B has the Starlock blade system, which was designed to minimize the loss of torque, by maximizing contact surface area with the blade. 

What we don’t like:

The 1-year warranty is slightly disappointing for a tool in this price range, although it seems to be standard. The Starlock blades are cross-compatible with certain manufacturers, but it still does limit the availability of replacement blades. 

Despite the minor downsides, the Bosch GOP55-36B is one of the most powerful corded oscillating tools on this list. 

Honorable MentionMulti-Max MM35 

Check Price

Oscillations per Minute: 10,000-21,000 

Weight: 2.8 lbs 

Features: Quick Blade Change, Soft Carry Bag 

Warranty: 2 Year 

What we like: 

Dremel is perhaps one of the most well-known manufacturers for small precision power tools and for good reason. At 2.9 lbs the Dremel MM35 is one of the lightest corded oscillating tools on the market. With a 3.8amp motor, the Dremel MM35 offers a great deal of power. 

What we don’t like: 

The only thing that bothers me about Dremel products, is the fact that you have to use Dremel branded accessories. It is not a huge deal, but it certainly limits the range of blades available for use on your oscillating tool. 

Top 5 Best Corded Oscillating Tools-Final Verdict

The corded oscillating tool is one of the tools that just cannot be replaced by its cordless counterpart. When making the choice on what corded oscillating tool to buy, it is important to think about how often the tool will be used and what it will be used for. If you are a professional in the industry who uses the tool on a daily basis you may want to opt for the Fein FM350SQL. If you are just a casual DIY’er the Rockwell F50 may be just fine. Regardless of your choice, these top 5 best corded oscillating tools are all great options.

For other tool guides and tricks check out our page.

Top 5 Best Framing Hammers

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>